Flask Accessories
Bellco Glass, Inc. Internal impeller is useful because it decreases risk of contamination. Has an adjustable shaft to align the paddle. Large paddle promotes increased oxygenation. Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. The seal
Internal impeller is useful because it decreases risk of contamination. Has an adjustable shaft to align the paddle. Large paddle promotes increased oxygenation. Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. The seal
Chemglass Life Sciences Replacement Glass Shaft Only for 500mL Internal Impeller BioProcess Spinner Flasks
Internal Stirring Assembly for 100mL BioProcess Spinner.Flasks
Chemglass Life Sciences 2-Port Drip Tube Assembly with Open Top Cap and Gasket
2-Port Drip Tube Assembly with Open Top Cap and Gasket. Replacement part for item 50143731. Assembly is ideal for use with bio reactors where addition or sampling is required. The drip tube assemblies are constructed of 316L electropolished stainless steel and include a blue polypropylene GL32 open top cap with a white silicone gasket. Drip tubes have a finish of 20Ra or better. Our addition and sampling vessel with hose barbed 2-port drip tube assemblies are designed for addition or sampling of media, acid or base.
Chemglass Life Sciences 2-Port Assembly, 8000mL Spinner Flask
Port assemblies are constructed of 316L electro-polished stainless steel.These port assemblies fit all types of spinner flasks.The assemblies consist of a siphon and vent tube.Supplied complete with a GL-45 open top cap and silicone gasket.
Chemglass Life Sciences 3-Port SST Dip Tube Assy for 6L Spinner Flasks
Our hose barbed 3-port drip tube assemblies are designed for addition or sampling gof media from Angled Side Arm (ASA) Spinner Flasks.The dip tube assemblies are constructed of 316L stainless steel, electropolished to a 20Ra (or better) finish and include a blue PP GL-45 open top cap with white silicone gasket.
Chemglass Life Sciences 3-Port SST Thermowell Assy for 1L Spinner Flasks
Our hose barbed 3-port large diameter thermowell assemblies are designed to accommodate a wide variety of RTD's and dial thermometers of different diameters for measuring the process temperature inAngled Side Arm (ASA) Spinner Flasks.All 316L stainless steel tubes have an electropolished finish to a Ra 20u (or better).These assemblies feature a thermowell tube with 0. 375" OD and a 0. 305" ID that will accept all 1/4" thermometer probes.The assemblies include a blue PP open top GL-45 cap with white silicone gasket.
Bellco Glass, Inc. Ideal for small working volumes with ph and do probe. 32mm low sidearms for insertion. Size: 3l Center cap size: 100mm 32mm compression fitting probe & port assemblies sold separately Dimensions: 165 x 290mm
Ideal for small working volumes with ph and do probe. 32mm low sidearms for insertion. Size: 3l Center cap size: 100mm 32mm compression fitting probe & port assemblies sold separately Dimensions: 165 x 290mm
Chemglass Life Sciences 2-Port Angled Vent Assembly, GL-32, Universal, 316L Electro Polished Stainless Steel, 3/16" OD Hose Barbs, Complete with Gasket and Cap
Universal vent port assembly is constructed of 316L electro polished stainless steel.These port assemblies fit all types of spinner flasks, media bottles and vessels.Configurations consist of a single vent tube, vent and short fill tubes, or angled vent and fill tubes.Supplied complete with a GL-32 or GL-45 open top cap and silicone gasket.
Chemglass Life Sciences Cap, GL-45, Green, Open Top (1-5/16" Hole), Polypropylene
Open top polypropylene caps for use with port assemblies.Caps can be autoclaved in steam to 140 degreesC.
Bellco Glass, Inc. All port assemblies are manufactured from 316l stainless steel and have an electropolish finish. 2- port assemblies have siphon and vent tubes. 3-port assemblies have siphon, fill tube and vent tubes. All port assemblies include a 45mm blue polypropylene
All port assemblies are manufactured from 316l stainless steel and have an electropolish finish. 2- port assemblies have siphon and vent tubes. 3-port assemblies have siphon, fill tube and vent tubes. All port assemblies include a 45mm blue polypropylene
United Scientific™ Rubber Filter Aid
This Rubber Filter Aid is a molded rubber disc that supports a filter crucible or a funnel in the neck of a filter flask.
United Scientific™ Bumper Guard For Volumetric Flask
These guards help prevent volumetric glassware from breaking when tipping over.
Cole-Parmer Idex Flangeless Fitting, Standard Knurl, Natural PEEK, 1/8" OD Tubing, 1/4-28 Flat-Bottom; 10/PK
Just slip the nut and ferrule over the tubing and finger tighten the assembly into your receiving port. Unlike the time required to flange tubing, it only takes a few seconds to change the components.
Chemglass Life Sciences pH and DO Probe Rack
Freestanding rack can hold 36 probes (pH or DO) up to 235mm long.Rack is constructed of polypropylene with stainless steel uprights.Footprint of rack 10. 5" Length x 4.5" width.pH and DO probes must be purchased seperately.